Why Does Greta Van Fleet Claim They Donu2019t Sound Like Led Zeppelin?

Simple. Every band wants to be known for their originality. Being tainted by the mere suggestion that a band sounds "just like" another band is not something a band wants to have to live down for the rest of their career.The reality is, although Josh Kiszka's voice sounds rather reminiscent of Plant's voice (But his voice is his, you can't fake Plant, although many singers have tried...), the band itself doesn't sound all that much like Zeppelin.

Sure the guitars are running through similar amps with similar tones, but how many Rock bands don't use similar guitar sounds? Yes, they have some riffs that are similar to Page's riffs, but again, what band doesn't have songs with riffs similar to that... From Guess Who to Aerosmith to Heart to Living Colour to Kings X to Royal Blood and many, many more. Understand, this is Hard Rock, not Be-bop or Jazz. And certainly many of Greta Van Fleet's songs sound very little like Zeppelin at all. For that matter Led Zeppelin III didn't even sound like Led Zeppelin. Sure after 49 years it does, but when it first came out I thought WTF is this? But, Music critics love to put bands in a "box". Screw that! Any kind of art is either appealing to any individual person or not, critics be damned.

The first time I heard Greta Van Fleet, I have to admit I thought that Plant must have come out with a new album. But not Led Zeppelin. Led Zeppelin died with John Bonham, and I really respect the surviving Led Zeppelin members for their decision to acknowledge that their "chemistry" could never be the same, or as magical without "Bonzo" (Unlike the Who). It would be like dropping a big wet mushy "deuce" on everything wonderful they had done together. (Thanks LZ.

)I applaud these young men for their talent. They are a bit younger than Zeppelin was when they began. Assuming that they continue on their current trajectory, I expect them to grow musically and philosophically into an amazing band on their own merits. If sounding a bit like Zeppelin opened the door for them, fine.I'm sure it was a great compliment to them to be compared to Led Zeppelin early on, but I'm also sure they don't want to be considered a "Led Zeppelin Clone" going on indefinitely into the future. So let's all just let Greta Van Fleet just be Greta Van Fleet. And see how they sound on future albums. And how well they pass the test of time.

Sadly Led Zeppelin and their heyday is over. But it is just good to hear a new band with an occasionally somewhat similar sound. I've missed that

• Related Questions

Why are Europeans not prone to be anti-science? Is there any cultural/religious difference?

I think as individuals, Europeans are just as likely to be anti-science as Americans (which I guess were doing the comparison with). I know plenty Dutch people who are shockingly ignorant of science (from my nerdy perspective) and consequently have the weirdest opinions a wide variety of subjects.I know people who are intrigued by weird conspiracy theories; I personally know one or two who believe the moonlandings were fake. I met an actual flat-earther here once. And several people who insist phone signals give them cancer. People who believe in the magic power of certain pretty types of stone (women mostly for this one in my direct experience; havent met a magic stone guy yet but Im sure they must exist). We have fire-and-brimstone christians here, who are only by virtue of our culture restrained from constantly proselytizing about how gays are the spawn of satan (thank god for our non-fundamentalist approach to free speech). Stupid is universal.

However, the general culture here is still to some degree one where a higher eductated person is seen as probably being more informed about his field of study than the average layperson. There is a fairly deep respect for study and knowledge. A random persons opinion is not necessarily just as valid as the opinion of the expert. At the same time, we dont necessarily accept that a professor in physics by definition also has a more valid opinion on politics or even stem cell research than some average person (although the latter does also happen here and it annoys the hell out of me: schoenmaker, blijf bij je leest.I get the impression that in the US, there is a deeply ingrained distrust for higher (human) authority. Being educated in a field does not necessarily give you an edge in a conversation about that subject. The other guys opinion is just as valid. I can of course only imagine what it means to live in a culture where being educated is seen with suspicion in some circles; it must make it hard to trust any sources of information. I mean, what do they know, right? It seems to me that it would make you trust the words of uncle Harry, who you have known for your entire life, and who hasnt steered you wrong yet, is much more reliable than someone quoting facts from The Scientific American he holds in his hand.

If you combine that mindset with an educational system that is somewhat light on content compared to many other cultures and you have population that ON AVERAGE (trying to head off the people in the comments who struggle to grasp the value and limitations of discussing stereotypes) starts out with a smaller set of verifiable facts about the world under his belt, and you have a perfect storm of anti-science people.But, in a nutshell, we have anti-science people in Europe as well, dont worry. Please dont send any over or anything - were good.


Which song is better, "Bohemian Rhapsody" or "Stairway to Heaven"?

Probably the greatest songs ever written. So let's compare!!!!Vocals: No doubt the point goes to Bohemian Rhapsody. First of all: Freddie Mercury, period. The greatest vocalist ever, even better than Robert plant. It's not just about the singer. The whole song consists of around 150 vocal overdubs, with some of the most complex vocal harmonies made by Freddie, Roger and Brian in the Opera section. Whereas, Stairway to Heaven has no vocal harmonies and the whole band has no backing vocalists.Instruments: Both songs have amazing instrumentals but I think the point should go to Stairway to Heaven. Arguably it has the most recognizable guitar riff of all time in any genre of music ever. Bohemian Rhapsody's guitar solo is also considered in the top tens, but Stairway to Heaven is far ahead in terms of that. But, Bohemian Rhapsody has a wonderfully Complex piano part, which stairway doesn't.Musicality: the point again goes to Bohemian Rhapsody. This is because of the immense complexity throughout the song, especially the Opera part. I am a pianist and guitarist myself, and it is obvious that Bohemian Rhapsody is an incredibly tough and complex musical piece whereas, almost any beginner can also play Stairway to Heaven. I agree that Bonzo and Page are the greatest musicians in their fields but this song lacks the complexity.

Length: both songs are long enough but Stairway to Heaven is two minutes longer. But that does not mean it gets a point. In, Bohemian Rhapsody's six minutes, so many things happen. It consists of 5 different sections each which can make a good song by itself. You will never get bored and you cannot stop listening in the middle. Its sort of a movie, with all the sudden action and suspense and climax and all. Whereas Stairway to Heaven has only two sections. So point Goes to Bohemian Rhapsody.

Popularity: if we go by the charts, Bohemian Rhapsody is one of the record holders. Stayed for more than 2 weeks at #1 position. Stairway to Heaven was not even in the top 20 list. So point must go to Bohemian Rhapsody, right? But wait!!!! If we see the general popularity, a majority of the people say that Stairway to Heaven is the greatest Rock song ever written, with the greatest guitar solo and the greatest guitar riff in it. This is maybe because of the complexity of Bohemian Rhapsody that many people don't even succeed to understand it properly. So in this regard points go to both of them.

So, Bohemian Rhapsody - 4, Stairway to Heaven- 3.p.s Questions like these dont have any definite answer. It ultimately boils down to ones personal opinion. Even though I personally prefer BoRhap, I tried to keep this as neutral as possible (and thus the really close final scores). If you think Stairway to Heaven is better, then your opinion is equally acceptable.Also, if you ask me, Innuendo is a much better Queen song than BoRhap, and Kashmir a better LZ song than StH.

get in touch with us
empfohlene Artikel
Info. Wissen Nachrichten
Is the Traditional Energy-saving Lamp Regulator Used for LED Circuit? Detailed Analysis of 11 Defect
Can the controller of traditional energy-saving lamp act on LED circuit?There are many options for buying LED bulbs, but compatible led dimmers are difficult to choose. Many users will confidently say that it is OK to use the dimmer of traditional incandescent lamps. Now the most commonly seen on the market is thyristor dimmer, which is divided into DC and ac. it is very easy to use in incandescent lamps.After selecting the LED lamp with appropriate color temperature, lumen grade and beam angle, the dimming requirements are met. Different from the random dimming method of ordinary incandescent lamps, dimming LED bulbs with thyristors may be successful, but many problems will occur in most cases.Four conditions:The most common problem is that there is a buzzing beep or a strong stroboscopic. Ordinary incandescent lamps only need to adjust the voltage to adjust the light and shade, but it may not work for LED lamps. We have done experiments and the following four situations have occurred:1. It can't be opened at all. It doesn't light up at all!2. It can only be on at 100% illumination.3. It can work normally, but the buzzing sound is very loud.4. Stroboscopic occurs when it is adjusted to a certain brightness.Dimming principle:During the test, sometimes the LED can be used normally after it is dimmed to a certain limit. We judge that the reason why it doesn't light up is that the applied voltage of the dimmer is too small to reach the required voltage.The internal circuit of LED is much more complex than that of incandescent lamp. The real led dimmer is not only regulating voltage, but also has three principles:1. Wave width control dimming: digitize the square wave of the power supply and control the duty cycle of the square wave, so as to control the current.2. Constant current power supply regulation: the current can be easily adjusted by analog linear technology.3. Grouping control: group multiple LEDs and control them with a simple grouping device.Note the strobe:The reasons for the most stroboscopic cases are as follows: the adjustable resistor itself is not a very reliable component. Often, due to the entry of dust or the lax manufacturing process, there will be an instant jump fault when operating the adjustable resistor, and the light source will flash. Therefore, we need high-quality adjustable resistance, or use linear technology to regulate current rather than voltage.In fact, the internal driving function of LED itself can easily adjust the brightness and darkness, but most LED manufacturers remove this function to save costs. Whether the LED lamp can be dimmed is usually marked on the box. If there is no mark on the box, please use the dimming function with caution or use a special LED dimmer.Dimming will reduce life:A reminder is that dimming can easily reduce the life of the bulb. Why? Simply take a dimming method: we divide one second into 1000 parts, each part is 1 millisecond, and then make the LED light work for 7 milliseconds and turn off for 3 milliseconds through the control chip. In this way, it only works for 0.7 seconds in one second. However, due to the fast flashing interval, we can't feel its brightness flickering with our naked eyes, and we will only feel that its brightness has darkened, which is 0.7 times the original, This achieves the effect of dimming. Similarly, we can achieve 50% brightness, 32% brightness and any brightness. Blink in this way, it's strange not to break early!In order to avoid various problems, try not to use the physical dimming method for the smart bulb. Take out the mobile phone and open the app to adjust the light and shade.In fact, I still like to use the way of grouping device to control the brightness, which is simple, safe and easy to use. It can be easily done by touching the key switch or independent grouping switch. It is not necessary to fine tune the brightness from 0 to 100% perfectly in the home. It is OK to realize several levels of brightness adjustment, which can fully meet the needs.Analysis and retrieval of 11 disadvantages of LED wick:Compared with traditional incandescent lamps, led filament lamps have higher requirements for packaging. It is reported that at present, led filament lamps have very strict requirements for filament working voltage design, filament working current design, LED chip area and power, LED chip luminous angle, pin design, glass bulb sealing technology, etc. it can be seen that the manufacturing process of LED filament lamps is very complex, and there are certain requirements for the financial strength, supporting facilities and technology of manufacturers.In the production process, due to different processes, the requirements for materials are also different. In addition, in production, many equipment need to be transformed according to the performance characteristics of LED filament lamps, which also makes the manufacturers of relevant materials of LED filament lamps miserable. The defects in the bulb material also make the LED filament lamp easy to be damaged during transportation. The complex process and low yield make the LED filament lamp unable to obtain high praise from manufacturers and consumers.1. Difficult process, poor heat dissipation and easy damageAlthough led filament lamps have attracted much attention in the domestic market in the past two years, at present, the problems existing in the production of LED filament lamps can not be ignored: the manufacturing process is difficult, several different processes need to be integrated, and the yield is low; More than 8W led filament lamps are prone to heat dissipation problems; It is easy to be broken and damaged in the process of production and use.2. Structure, performance and price to be improvedDue to the relatively late entry of LED filament lamps into the market, the market-related sharp bubbles, tail bubbles and spherical bulbs are mainly "patch type". In addition, the filament lamps that entered the market in the early stage are far from consumers' expectations in terms of structure, performance and price, which makes consumers have some misunderstandings about led filament lamps. With the breakthrough of key technologies, the maturity of packaging technology and the improvement of bubble sealing technology, the luminous efficiency, finger display, service life and cost of LED filament lamps will be improved to a certain extent.At present, the LED filament lamp needs to be improved in too many places. It is like a newborn "premature baby". It is not very mature in all aspects, with high cost, complex production process and low production capacity. Therefore, we should improve the raw materials, led beads and manufacturing process in the future, so as to improve the production capacity of LED filament lamps, reduce losses and improve delivery efficiency.3. Low power and poor heat dissipation are obstaclesAffected by the production process, there are many problems in LED filament lamps, such as high cost and high damage rate during transportation due to the defects of bulb material. In addition, the heat dissipation of high wattage led filament lamps has also become an obstacle for LED filament lamps to enter ordinary people's homes.Problem 2: high priceAccording to the market survey, the average retail price of a 3W led filament lamp is about 28-30 yuan, which is much higher than that of LED bulb lamps and other lighting products with the same power, and several times higher than that of LED incandescent lamps with the same power. Therefore, many consumers are scared away by the price of LED filament lamps.At this stage, the market share of LED filament lamps is less than 10%. Nowadays, as a characteristic product, led filament lamp restores the luminous feeling of traditional tungsten filament lamp and is loved by many consumers. However, the high cost, low light efficiency and small application range of LED filament lamps are also the problems that lighting manufacturers must face and look directly at in the next stage.1. Supporting materials increase product costThe market prospect of LED filament lamp is very bright, but there are difficulties in the promotion of LED filament lamp at this stage, mainly due to its high cost and the lack of large wattage, which makes the application of LED filament lamp limited to the flower lamp market. In addition, the matching of raw materials also increases the cost, because there is no standard in the specification and shape of filament lamp, and its market volume is small, As a result, the supporting materials are basically customized, and the manufacturing cost remains high.2. The cost of LED filament is too highAmong all parts of LED filament lamp, the highest cost is led filament, mainly because of its complex production process and high cutting cost; The production efficiency is not high and the degree of automation is low, resulting in the cost. At present, the cost of 3-6w filament bulb can be controlled below 15 yuan, of which the cost of LED filament accounts for more than half.3. The packaging of LED filament lamp is exquisiteThe packaging of LED filament lamps is more exquisite. The light effects encapsulated by each enterprise are different. Led filament lamps still have certain limitations in power and heat dissipation, resulting in higher prices than ordinary LED light sources.Problem 3: small marketAt this stage, the power of the best-selling led filament lamp in the market is basically less than 10W, which shows that at this stage, the LED filament lamp is technically trapped in the problem of heat dissipation and can not achieve high power. It also shows that it can only cover a small section of the whole lighting product line and can not be widely promoted. Even if it plays the "nostalgic" brand, the LED filament lamp market is only a small market, It can't become the mainstream for the time being.1. Low consumer acceptanceWith the shrinking incandescent lamp and energy-saving lamp market, LED lighting products are slowly recognized by end consumers. However, at present, the market of LED filament lamps is still very limited. Due to the limited application and power of LED filament lamps, the acceptance of LED filament lamps by end consumers is not very high.In addition, consumers do not know enough about led filament lamps. Many people think it is just an improvement of ordinary incandescent lamps.2. The main demand comes from the projectAs LED filament lamps are mainly used in flower lamps, and their main demand comes from engineering lighting, general dealers will not mainly promote LED filament lamps. Even if a few businesses sell LED filament lamps, they won't have too much inventory.Problem 4: difficult to promoteEntering the terminal market, we can find that the LED filament lamp is not as hot as expected for two reasons:1、 Many stores do not promote filament lamps as key products, and consumers' awareness and acceptance of filament lamps are not high;2、 Compared with LED light source products such as bulb and sharp bulb, led filament lamp products have no qualitative change. On the contrary, the price is relatively high and it is difficult to go. Let alone replace the market position of LED bulb, energy-saving lamp and other products.Therefore, at present, the market advantage of LED filament lamp is not very obvious, and the market is basically waiting and trying.At present, the difficulty of pushing led filament lamps in the terminal market lies in:1、 Poor integration between traditional bubble sealing industry and LED packaging industry (concept and process integration);2、 It is not easy to reverse the concept of end consumers;3、 The acceptance of LED filament lamp products by society and government is not clear. In addition, the price of LED filament lamp is high, and consumers have not really distinguished the difference between LED filament lamp and incandescent lamp, which leads to the difficulty of LED filament lamp market promotion.1. Merchants are not active in promotionAt present, if led filament lamps want to achieve good performance in the market, they also need to strengthen publicity and innovation. The development of LED industry is increasingly fierce, and industry standards have been issued one after another, which has exacerbated the market development resistance of LED filament lamps. Especially at this stage, many consumers do not understand led filament lamps, and merchants are not active enough in promoting led filament lamps. Even most merchants are not very optimistic about their development prospects. In actual sales, customers usually see or ask, Businesses will push this product.2. High price makes promotion difficultAt present, it is difficult to promote LED filament lamps in the market. Because consumers do not know much about led filament lamps, the probability of purchase is very small. In addition, due to the impact of e-commerce, the transaction rate of LED in physical stores is lower. Some consumers pay more attention to the price when purchasing products. Therefore, there is still a long way to go for LED filament lamps to enter the families of ordinary consumers.3. Lack of new selling points of LED filament lampsAt present, led filament lamp is in the primary stage of promotion, and very few people know its advantages because of the appearance and original quality of the product
The Market Prospect of LED Transparent Screen Is Considerable
When Will the National Standard for LED Solar Street Lamps Be Improved
Application Analysis of Constant Current Ic-nu510 for LED Light Box
Mulin Forest Ji Liang: the Prospect of LED Filament Lamp Is Worth Looking Forward To
Detailed Anatomy of Various Protection Circuit Examples of Switching Power Supply
Micro LED Display Technology Can Not Be Mass Produced, and Mass Production Remains to Be Seen
This Paper Briefly Introduces 7 Methods to Improve the Heat Dissipation Effect of LED Display Screen
Lesson 23: LED Nixie Tube Static Display Interface and Programming
What Is the Use of the Small Circuit Board Inside the LED Lamps
related searches
What Led You to Start Practicing Meditation?
Motorcycle LED Lights?
Difference in Lcd and Led Television?
Buy now the Best 4ft LED Tube Lights
How Can I Start a Side Project While Employed?
Who Would Win in a Fight Between the Beatles and Led Zeppelin Members in "most Talented X" Competiti
Why Isn't John Paul Jones Celebrated As Much As the Other Three in Led Zeppelin?
Do You Think Vladimir Putin Is Really a Savage Leader Or Are We Led to Believe It with Stories in th
Every Body Stares at My Little Sister. How Should I Feel As an Older Brother?
Schnell verbindung



Über uns

Kontaktieren Sie uns


Das moderne Haus

Landschafts haus

Vintage Haus

Guangzhou DaLong CNC Machinery Technology Co.Ltd spart keine Kosten, wenn es darum geht, sicherzustellen, dass wir über die neueste und beste Ausrüstung verfügen.

keine Daten

Unternehmens profil

Unternehmens geschichte


Copyright © 2021-2035 Guangzhou DaLong CNC Machinery Technology Co.Ltd | Sitemap

Wholesale Machinery supply Melayu  |  Milling machine manufacturer العربية  | EDM Machine factory OEM