Where Did You Meet Your Husband/wife and What Age?

My wife and I are not sure when we met or even where., though we are pretty sure where.Back story: my wife was my little sister's best friend. Her mother worked, so she was always around our house, even staying for dinner. I came from a large family (eight kids) so it was not unusual for someone to stay for dinner, in fact, we may not have even noticed an extra person at the tableI was much older (a senior at the university), my sister and her friend were still in high school. For many years, she was just more background noise. I hardly noticed her. She says the first thing she remembers me saying to her was, "Will you girls keep it down, I am trying to study.

"I graduated, moved on and was in a relationship that was coming to an end. My future wife and my sister graduated from high school and moved into an apartment together. I do not particularly get along with my sister, so I had little contact with her or her roommate.

However, my wife kept putting herself in my path so our lives kept crossing. She claims she was not doing this purposely, but one day I looked at her and said to myself, "When the hell did she grow up."Our first date was only several months after she graduated from high school. I was not looking for a relationship, but just wanted to go out and have fun. However, I started to fall for her. She claims she was in love with me from the beginning. We were married seven months later. She was a very mature eighteen year old and I was a fairly immature twenty-five year old.

We have been married for over 45 years, and I am more in love with her every year. We have three grown children and five grandchildren. Life is goodWhere did you meet your husband/wife and what age? ?.

• Suggested Reading

Which movies made big steps for CGI?

There have been some landmarks that propelled the art and indeed the industry.BEFORERay Harryhausen was literally the engine behind the world ahead, the limitations fuelled our imagination and the race towards fully digital was only matter of time.Luxo Jr. - Was the proof the field was maturing and artist working together with technicians was the solution to the new field ahead.

AFTERTron - Introduced the foundation of CGI in film-making and although surely niche movie in the sense of the story in my opinion was the first big push (and a very expensive one)Superman - The first CGI sequence The Abyss - The very first cg creature effect supporting the story was in my opinion the real start of CGI in film-making as we know it.Indiana Jones The last crusade - With the very first composite that paved the way to footage manipulation.Jurassic Park - Literally changed everything, suddenly opened the door for creatures surpassing any animatronic and liberated the director in terms of cinematography.Toy Story - Again changed everything again, animation was to move to CG and on the way many traditional animation studios have to reinvent themselves.Terminator 2 - The first credible VFX heavy movie that paved the door for what was to come.The Matrix - Probably the real cornerstone of modern cinematography that again changed the whole field of film-making with both effects never seen before and novel technologies alongside a fantastic story.Lord of the rings trilogy - Changed everything again with "credible" hero CGI characters, crowd simulation which again liberated the director and production from the extremely costly crowds that were done in the past and on the way propelled a new wave of CGI movies and action movies lead by Marvel.Avatar - The first Stereo movie with real mass appeal and that on its success gave the opportunity to the studios to start milking the technology which later has unfortunately drifted to lesser cheats that defeat the whole experience (dimensionalisation)

------

If a country buys fighter jets from the US, how likely is it that the jets come installed with "backdoor" software that can disable them?

Ive never heard of a backdoor to disable aircraft. I do know if you fall out of favor with the US you dont get any parts to fix your plane and they dont fly very long - an F-35 fleet without the support of Lockheed Martin will not fly very long. We also know the Israeli Lightnings software is being upgraded to suit their neeeds, this is being done in house and outside the US so they have in depth knowledge of its systems and wouldnt buy a plane that could be disabled under their noses.

From the National Interest:The Lightnings sophisticated flight computer and ground-based logistics system has become a matter of contention with many F-35 operators. Foreign air forces would like to have greater access to the F-35s computer source codes to upgrade and modify them as they see fit without needing to involve external partiesbut Lockheed doesnt want to hand over full access for both commercial and security-based reasons.Israeli F-35Is uniquely will have an overriding Israeli-built C4 program that runs on top of Lockheeds operating system. One of F-35s key capabilities come from its superior ability to soak up data with its sensors and share it with friendly forces. Compatibility with datalinks used by friendly Israeli air and ground forces is thus an important aspect from Israels perspective as it tracks the position of hostile surface-to-surface rocket launchers and surface-to-air missiles systems.The new system will also allow the IDF to install Israeli-built datalinks and defensive avionics systems such as radar-jamming pods. An official told Aviation Week the IAF expects the advantages of the F-35s low radar cross-section will be good for five to ten years before adversaries develop countermeasures. There already exist methods for detecting stealth fighters, including long-range infrared sensors, electromagnetic sensors, and low bandwidth radars (though all have significant limitations), and more exotic technologies such as quantum radar are also under development

------

If the US asked if Canada wanted to merge and make one big US, would they do it?

When this first came out two things struck me :

1. the argument was almost entirely based on natural resource exploitation

2. the discussion and its author were almost completely ignored by the media and Canadian public, almost comedically so, when so often there would be outrage and national naval-gazing for months and months, there was instead a shrugFirst off disclaimer, I find Diane Francis to be, at least in her public presentation, quite distasteful. This is quite unique for me as I am generally very open; but for Diane I found her message and demeanor to make me suspicious of her approach and motivation.I don't generally understand the "pure-wealth" angle. There are such distinct social and cultural differences that will not bear out merged-policy debate. For example (in no particular order) :

1. social programmes Canadians expect a degree of collective support, medical, employment, welfare, childcare and so on. Canadians almost universally support the collective, Americans do not.

2. cultural while sometimes debated, support for the arts is usually seen, especially within urban centres as having a role for government

3. crime/safety/guns probably one of the biggest fear-point for Canadians is the American attitude towards "free-flowing" guns. Canadians almost universally support control and in some cases bans, Americans do not. Not universally.

4. environmental even when challenged with the allure of oil wealth, all Canadians including the Albertans that benefitted the most financially, experienced great moral dilemma with the environmental consequences of the oil extraction industry.Even when you take into consideration the wide geographic nature of Canada and the founding peoples (French Canada, English and Indigenous), the above largely hold true coast to coast to coast even if stretched and prodded from time to time. A fact Quebec separatists don't want widely known.Ironically as Dan Holliday noted, as Canada is more liberal, if not *far* more liberal, I cannot see Canadians wanting to change that in any way at any cost. And Diane's question at a national "soul" level asks Canadians to do precisely that.

------

Why is Led Zeppelin III so underrated?

Led Zeppelin III wasn't a repeat of Led Zeppelin's first 2 albums - the majority obviously wanted the band to figuratively be another Status Quo or AC/DC, where they knew what they were going to get before they listened to the record.Now I don't know if I've missed the point of the others who stated III was 'between 2 iconic albums', when I state that I think they've missed the point that I believe the 2nd - untitled - iconic album became even more iconic due to the circumstances involved; despite the most slowly-selling of Led Zeppelin's 1st 3 albums eventually hitting #1 in the U.S., the band were a little hurt by its tepid reception, so they resolved to make sure the next album would have the most impact by removing ALL writing from the sleeve - the music alone would stand on its own merits. Of course the record company's London office were in panic mode, deeming it as 'commercial suicide' - but Page pointed out Led Zeppelin's contract stipulated complete artistic control and suggested they contact head office to verify - otherwise he would not hand over the master tapes until they agreed on the band's conditions.Also the band had gelled & matured in such a way as to produce an album that contained not only the most played & requested song on U.S. radio in "Stairway To Heaven", but also the most lethal drum sound ever captured on tape in "When The Levee Breaks" - making it the 2nd most sampled piece of music in history!Although I got carried away and appear to have waffled on more about the untitled (IV) album than address the issue of why the preceding (III) album was virtually ignored, I hope I've put into perspective the fact that maybe III's 'suffering' contributed to IV's legendary status - although we'll never know if that would have changed had the band decided to officially call it Led Zeppelin IV.

get in touch with us
empfohlene Artikel
Info. Wissen Nachrichten
Is the Traditional Energy-saving Lamp Regulator Used for LED Circuit? Detailed Analysis of 11 Defect
Can the controller of traditional energy-saving lamp act on LED circuit?There are many options for buying LED bulbs, but compatible led dimmers are difficult to choose. Many users will confidently say that it is OK to use the dimmer of traditional incandescent lamps. Now the most commonly seen on the market is thyristor dimmer, which is divided into DC and ac. it is very easy to use in incandescent lamps.After selecting the LED lamp with appropriate color temperature, lumen grade and beam angle, the dimming requirements are met. Different from the random dimming method of ordinary incandescent lamps, dimming LED bulbs with thyristors may be successful, but many problems will occur in most cases.Four conditions:The most common problem is that there is a buzzing beep or a strong stroboscopic. Ordinary incandescent lamps only need to adjust the voltage to adjust the light and shade, but it may not work for LED lamps. We have done experiments and the following four situations have occurred:1. It can't be opened at all. It doesn't light up at all!2. It can only be on at 100% illumination.3. It can work normally, but the buzzing sound is very loud.4. Stroboscopic occurs when it is adjusted to a certain brightness.Dimming principle:During the test, sometimes the LED can be used normally after it is dimmed to a certain limit. We judge that the reason why it doesn't light up is that the applied voltage of the dimmer is too small to reach the required voltage.The internal circuit of LED is much more complex than that of incandescent lamp. The real led dimmer is not only regulating voltage, but also has three principles:1. Wave width control dimming: digitize the square wave of the power supply and control the duty cycle of the square wave, so as to control the current.2. Constant current power supply regulation: the current can be easily adjusted by analog linear technology.3. Grouping control: group multiple LEDs and control them with a simple grouping device.Note the strobe:The reasons for the most stroboscopic cases are as follows: the adjustable resistor itself is not a very reliable component. Often, due to the entry of dust or the lax manufacturing process, there will be an instant jump fault when operating the adjustable resistor, and the light source will flash. Therefore, we need high-quality adjustable resistance, or use linear technology to regulate current rather than voltage.In fact, the internal driving function of LED itself can easily adjust the brightness and darkness, but most LED manufacturers remove this function to save costs. Whether the LED lamp can be dimmed is usually marked on the box. If there is no mark on the box, please use the dimming function with caution or use a special LED dimmer.Dimming will reduce life:A reminder is that dimming can easily reduce the life of the bulb. Why? Simply take a dimming method: we divide one second into 1000 parts, each part is 1 millisecond, and then make the LED light work for 7 milliseconds and turn off for 3 milliseconds through the control chip. In this way, it only works for 0.7 seconds in one second. However, due to the fast flashing interval, we can't feel its brightness flickering with our naked eyes, and we will only feel that its brightness has darkened, which is 0.7 times the original, This achieves the effect of dimming. Similarly, we can achieve 50% brightness, 32% brightness and any brightness. Blink in this way, it's strange not to break early!In order to avoid various problems, try not to use the physical dimming method for the smart bulb. Take out the mobile phone and open the app to adjust the light and shade.In fact, I still like to use the way of grouping device to control the brightness, which is simple, safe and easy to use. It can be easily done by touching the key switch or independent grouping switch. It is not necessary to fine tune the brightness from 0 to 100% perfectly in the home. It is OK to realize several levels of brightness adjustment, which can fully meet the needs.Analysis and retrieval of 11 disadvantages of LED wick:Compared with traditional incandescent lamps, led filament lamps have higher requirements for packaging. It is reported that at present, led filament lamps have very strict requirements for filament working voltage design, filament working current design, LED chip area and power, LED chip luminous angle, pin design, glass bulb sealing technology, etc. it can be seen that the manufacturing process of LED filament lamps is very complex, and there are certain requirements for the financial strength, supporting facilities and technology of manufacturers.In the production process, due to different processes, the requirements for materials are also different. In addition, in production, many equipment need to be transformed according to the performance characteristics of LED filament lamps, which also makes the manufacturers of relevant materials of LED filament lamps miserable. The defects in the bulb material also make the LED filament lamp easy to be damaged during transportation. The complex process and low yield make the LED filament lamp unable to obtain high praise from manufacturers and consumers.1. Difficult process, poor heat dissipation and easy damageAlthough led filament lamps have attracted much attention in the domestic market in the past two years, at present, the problems existing in the production of LED filament lamps can not be ignored: the manufacturing process is difficult, several different processes need to be integrated, and the yield is low; More than 8W led filament lamps are prone to heat dissipation problems; It is easy to be broken and damaged in the process of production and use.2. Structure, performance and price to be improvedDue to the relatively late entry of LED filament lamps into the market, the market-related sharp bubbles, tail bubbles and spherical bulbs are mainly "patch type". In addition, the filament lamps that entered the market in the early stage are far from consumers' expectations in terms of structure, performance and price, which makes consumers have some misunderstandings about led filament lamps. With the breakthrough of key technologies, the maturity of packaging technology and the improvement of bubble sealing technology, the luminous efficiency, finger display, service life and cost of LED filament lamps will be improved to a certain extent.At present, the LED filament lamp needs to be improved in too many places. It is like a newborn "premature baby". It is not very mature in all aspects, with high cost, complex production process and low production capacity. Therefore, we should improve the raw materials, led beads and manufacturing process in the future, so as to improve the production capacity of LED filament lamps, reduce losses and improve delivery efficiency.3. Low power and poor heat dissipation are obstaclesAffected by the production process, there are many problems in LED filament lamps, such as high cost and high damage rate during transportation due to the defects of bulb material. In addition, the heat dissipation of high wattage led filament lamps has also become an obstacle for LED filament lamps to enter ordinary people's homes.Problem 2: high priceAccording to the market survey, the average retail price of a 3W led filament lamp is about 28-30 yuan, which is much higher than that of LED bulb lamps and other lighting products with the same power, and several times higher than that of LED incandescent lamps with the same power. Therefore, many consumers are scared away by the price of LED filament lamps.At this stage, the market share of LED filament lamps is less than 10%. Nowadays, as a characteristic product, led filament lamp restores the luminous feeling of traditional tungsten filament lamp and is loved by many consumers. However, the high cost, low light efficiency and small application range of LED filament lamps are also the problems that lighting manufacturers must face and look directly at in the next stage.1. Supporting materials increase product costThe market prospect of LED filament lamp is very bright, but there are difficulties in the promotion of LED filament lamp at this stage, mainly due to its high cost and the lack of large wattage, which makes the application of LED filament lamp limited to the flower lamp market. In addition, the matching of raw materials also increases the cost, because there is no standard in the specification and shape of filament lamp, and its market volume is small, As a result, the supporting materials are basically customized, and the manufacturing cost remains high.2. The cost of LED filament is too highAmong all parts of LED filament lamp, the highest cost is led filament, mainly because of its complex production process and high cutting cost; The production efficiency is not high and the degree of automation is low, resulting in the cost. At present, the cost of 3-6w filament bulb can be controlled below 15 yuan, of which the cost of LED filament accounts for more than half.3. The packaging of LED filament lamp is exquisiteThe packaging of LED filament lamps is more exquisite. The light effects encapsulated by each enterprise are different. Led filament lamps still have certain limitations in power and heat dissipation, resulting in higher prices than ordinary LED light sources.Problem 3: small marketAt this stage, the power of the best-selling led filament lamp in the market is basically less than 10W, which shows that at this stage, the LED filament lamp is technically trapped in the problem of heat dissipation and can not achieve high power. It also shows that it can only cover a small section of the whole lighting product line and can not be widely promoted. Even if it plays the "nostalgic" brand, the LED filament lamp market is only a small market, It can't become the mainstream for the time being.1. Low consumer acceptanceWith the shrinking incandescent lamp and energy-saving lamp market, LED lighting products are slowly recognized by end consumers. However, at present, the market of LED filament lamps is still very limited. Due to the limited application and power of LED filament lamps, the acceptance of LED filament lamps by end consumers is not very high.In addition, consumers do not know enough about led filament lamps. Many people think it is just an improvement of ordinary incandescent lamps.2. The main demand comes from the projectAs LED filament lamps are mainly used in flower lamps, and their main demand comes from engineering lighting, general dealers will not mainly promote LED filament lamps. Even if a few businesses sell LED filament lamps, they won't have too much inventory.Problem 4: difficult to promoteEntering the terminal market, we can find that the LED filament lamp is not as hot as expected for two reasons:1、 Many stores do not promote filament lamps as key products, and consumers' awareness and acceptance of filament lamps are not high;2、 Compared with LED light source products such as bulb and sharp bulb, led filament lamp products have no qualitative change. On the contrary, the price is relatively high and it is difficult to go. Let alone replace the market position of LED bulb, energy-saving lamp and other products.Therefore, at present, the market advantage of LED filament lamp is not very obvious, and the market is basically waiting and trying.At present, the difficulty of pushing led filament lamps in the terminal market lies in:1、 Poor integration between traditional bubble sealing industry and LED packaging industry (concept and process integration);2、 It is not easy to reverse the concept of end consumers;3、 The acceptance of LED filament lamp products by society and government is not clear. In addition, the price of LED filament lamp is high, and consumers have not really distinguished the difference between LED filament lamp and incandescent lamp, which leads to the difficulty of LED filament lamp market promotion.1. Merchants are not active in promotionAt present, if led filament lamps want to achieve good performance in the market, they also need to strengthen publicity and innovation. The development of LED industry is increasingly fierce, and industry standards have been issued one after another, which has exacerbated the market development resistance of LED filament lamps. Especially at this stage, many consumers do not understand led filament lamps, and merchants are not active enough in promoting led filament lamps. Even most merchants are not very optimistic about their development prospects. In actual sales, customers usually see or ask, Businesses will push this product.2. High price makes promotion difficultAt present, it is difficult to promote LED filament lamps in the market. Because consumers do not know much about led filament lamps, the probability of purchase is very small. In addition, due to the impact of e-commerce, the transaction rate of LED in physical stores is lower. Some consumers pay more attention to the price when purchasing products. Therefore, there is still a long way to go for LED filament lamps to enter the families of ordinary consumers.3. Lack of new selling points of LED filament lampsAt present, led filament lamp is in the primary stage of promotion, and very few people know its advantages because of the appearance and original quality of the product
The Market Prospect of LED Transparent Screen Is Considerable
When Will the National Standard for LED Solar Street Lamps Be Improved
Application Analysis of Constant Current Ic-nu510 for LED Light Box
Mulin Forest Ji Liang: the Prospect of LED Filament Lamp Is Worth Looking Forward To
Detailed Anatomy of Various Protection Circuit Examples of Switching Power Supply
Micro LED Display Technology Can Not Be Mass Produced, and Mass Production Remains to Be Seen
This Paper Briefly Introduces 7 Methods to Improve the Heat Dissipation Effect of LED Display Screen
Lesson 23: LED Nixie Tube Static Display Interface and Programming
What Is the Use of the Small Circuit Board Inside the LED Lamps
related searches
What Led You to Start Practicing Meditation?
Motorcycle LED Lights?
Difference in Lcd and Led Television?
Buy now the Best 4ft LED Tube Lights
How Can I Start a Side Project While Employed?
Who Would Win in a Fight Between the Beatles and Led Zeppelin Members in "most Talented X" Competiti
Why Isn't John Paul Jones Celebrated As Much As the Other Three in Led Zeppelin?
Do You Think Vladimir Putin Is Really a Savage Leader Or Are We Led to Believe It with Stories in th
Every Body Stares at My Little Sister. How Should I Feel As an Older Brother?
Schnell verbindung

Zuhause

Service

Über uns

Kontaktieren Sie uns

UNSER PRODUKT

Das moderne Haus

Landschafts haus

Vintage Haus

Guangzhou DaLong CNC Machinery Technology Co.Ltd spart keine Kosten, wenn es darum geht, sicherzustellen, dass wir über die neueste und beste Ausrüstung verfügen.

keine Daten
ÜBER UNS

Unternehmens profil

Unternehmens geschichte

KONTAKTIEREN SIE UNS

Copyright © 2021-2035 Guangzhou DaLong CNC Machinery Technology Co.Ltd | Sitemap

Wholesale Machinery supply Melayu  |  Milling machine manufacturer العربية  | EDM Machine factory OEM